آمار مقالات کنفرانس
تعداد کل مقالات: 138تعداد صفحات کتابچه مقالات: 303
تعداد نمایش مقالات: 4622
نهمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد
نهمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد در تاریخ ۲۸ آذر ۱۴۰۳ توسط دانشگاه علم و صنعت ایران، دانشگاه تهران، برگزار گردید. شما می توانید برای دریافت کلیه مقالات پذیرفته شده در این کنفرانس به صفحه مجموعه مقالات نهمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد مراجعه فرمایید.
کلیه حقوق برای مجموعه سیویلیکا محفوظ است© - Symposia
مقالات پذیرش شده در نهمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد
Investigation detachment of ۲۰۲۴-T۳ Aluminum Alloy plates bonded by cohesive elements and cohesive surfaces
Core-shell CoFe۲O۴-ZnO nanocomposite for electromagnetic wave absorption application
The influence of tin addition on the microstructure and properties of ZrO۲-Al۲O۳ reinforced aluminum composites
Mechanical properties of epoxy-based nanocomposite reinforced with Al۲O۳ nanorods
Experimental Study of Tensile Properties of ۳D-Printed Titanium-Reinforced ABS
A New Mixed Mode I/II Fracture Criterion for Arbitrary Cracks in Orthotropic Materials Considering Fracture Process Zone Effects
Tailored Plasmonic Microspheres: Fabrication, Characterization and Harvesting Visible Light for Photocatalytic Removal of Organic Pollutants
Next-Generation of Photocatalytic Antibacterial Nanocomposite: Cutting-Edge Strategy for Effective Inactivation of Pathogenic Bacteria
Production of Ultra-pure Lithium Hydroxide, A Widely Used Material in The Production of Lithium-ion Batteries, Lithium Composites and Completing the Chain of Lithium Compounds from Its Halide Salt by Membrane Electrolysis method
Investigating the orientation of short carbon fibers on the surface hydrophobicity by using flocking electrostatic method
Chemi-resistive Behavior of Polyaniline/anatase TiO۲ Nanocomposite: Application in Sensing Devices
Corrosion Behavior of Nano- and Micro-Composite Materials
Investigating the microstructure and hardness coating of HA on Mg-Zn alloy by sol-gel method
Effects of aging on compressive properties of a multilayered hybrid cored-sandwich panel stiffened by composite grid structure
Comparative study of the flexural properties of fiber-metal laminates subjected to extreme freeze-thaw cycles
Simulation of layup effects on the residual stresses of layered composite structures caused by the curing process
Nonlinear Vibration Analysis of Simply Supported Euler-Bernoulli FGM beam under forced excitation
A Numerical Investigation into the Crashworthiness of Bio-Inspired Aluminum/CFRP Tubes Under Lateral Loading
Bio-Inspired Hybrid Energy Absorbers: Enhancing Crashworthi-ness and Weight Efficiency in Vehicles
An experimental study on fracture assessment of rigid nanocomposite foams weakened by a crack
Synthesis and characterization of spinel-based catalyst for sonocatalytic removal of ciprofloxacin antibiotics
Effect of aluminum hydroxide/epoxy coating on the flammability indexes of cotton/epoxy laminated composites
Environmentally-Friendly Strategies for Tailoring Interfacial Adhesion and Performance of All-green Biocomposites Based on Thermoplastic Starch/Kenaf Fiber
Extrusion Foaming of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) in the Presence of Spherical Nanosilica and Reactive Compatibilizer
Enhancing Polyamide ۶ and ۶.۶ Properties with Nanofillers: A Study on Graphene, CNTs, Carbon Fibers, and Titanium Dioxide- Short Review
Sonochemical Synthesis of Copper Ferrite-Chitosan Nanocomposites for Electrochemical Sensing and Biomedical Applications – Short Review
Synthesis of Cellulose Hydrogels for Drug Delivery Applications: Short Review
Enhancing ۳D Printed PLA Filaments with Nanoclay: Impact on Thermal Stability and Mechanical Performance
Nanoclay-Reinforced PLA/TPU Blends: A Study on Mechanical, Thermal, and Morphological Improvements- Short Review
Modeling the impact of flame retardants on burning behavior of ۳d printed polymer chair
Analysis of delamination propagation in open-hole GFRP composite under ۳ point-bending fatigue loading
A magnetic nanocomposite based on graphene oxide nanosheets and Zn-Fe layered double hydroxide as a highly efficient adsorbent for the removal of dye from aqueous environment
Melting of Holey Boron - Nitride nanosheet using molecular dy-namics simulation
Development of Lightweight PP/Talc Composites Reinforced with Hollow Glass Microspheres
Preparation and properties of biodegradable PBAT/CaCO۳ composite modified with chain extender
Extruded Poly(lactic acid)/Nanoclay Films Toughened with Ethylene-Vinyl Acetate Copolymer: Effects of Nanoclay Type and loading on Film Properties
Polymorphism-Driven Performance Enhancement in Lightweight Polypropylene Composites
Green Bead Foams of Poly(lactic acid) in Thermoplastic Starch Matrix Reinforced with Expanded Graphite
Improved mechanical properties of epoxy composite via modified and functionalized Short Carbon Fibers by LT۵۶۰
Optimization of Antisymmetric Angle-ply composite laminates under transvers and thermal loads
Study of corrosion rate of Co-CeO۲ composite for SOFC interconnect application
Decrese of Cr۲O۳ growth at presence of Co-La۲O۳ composite coating
Effect of Co-Y۲O۳ composite coating on oxidation activation energy of AISI ۴۳۰ steel
Investigation of flexural modulus of cyanate ester/carbon fiber composite at high temperature
Effect of PCA addition on the hardness and shear strength of A۰.۲۵CoCuMnNi high entropy alloy
Feasibility of the Manufacturing Process of Joint Stabilizers Using ۳D Printing
Thermo-mechanical properties of carbon/phthalonitrile composite at high temperatures
Effect of loading rate on the intralaminar fracture toughness of glass/epoxy laminated composites
Investigation of Interphase Cohesive Properties in Single-Fiber Glass/Epoxy Composite Using Tensile Test and FEM
Investigating the effect of interphase region on the elastic modulus of metal/graphene nanocomposites
Prediction of elastic modulus of polymer/carbon nanotube nanocomposites by mean field method
Plant-Based Biocomposites of Poly (lactic acid)/Rice Straw/Soybean Oil: Effect of Eco-friendly Boric Acid Pulping and Compatibilization on Properties
Investigation of the Effect of TiO۲ NPs and PEG on the Performance of PAN Nanocomposite Ultrafiltration Membranes
Cyclodextrin-Metal–Organic Framework (CD-MOF) as efficient carrier for sustained drug delivery
Low-energy impact response of rubberized cork sandwich structures with glass face sheets
The Experimental Investigation of Low-Velocity Impact on Sandwich Structures with a Cork Core and Basalt Face Sheets
Low Velocity Impact Behaviour of Glass- and Basalt-Reinforced Vinyl Ester Composites
Comparison of buckling capacity in CFRP composite plate and Hemp-Epoxy composite plate
Estimation of burst pressure of type IV composite pressure vessels using various damage criteria for different composite layup
Development of MXene/PEDOT:PSS nanocomposite for electrochemical applications
Mixed-Mode (I/II) Fracture of Glass/PA۶ Thermoplastic Composites Using Image Based Correlation Methods
Effect of sintering temperature on the microstructure and hardness of Al ۶۰۶۱ matrix composites reinforced with ۵vol.% of AlFeCuCrNi high-entropy alloy
Effect of stainless steel ۳۰۹ (SS) reinforcing particles addition on the microstructure, porosity and hardness of Al ۶۰۶۱/SS composites
Using Nanocomposites in the Heat Transfer System of Li-ion Battery Packs of Electric Vehicles
Design of glass/epoxy composite stacking using machine learning algorithms
Morphological Evaluation of Conductive Polymer Blends by EIS measurements
Defects detection in PTFE using VMD analysis and Infrared Thermography
Nondestructive Testing of PCTFE panels using Infrared Thermographic Signal Reconstruction and image processing
Bio-composites of Polylactic acid/Polyethylene glycol/ Cellulose Nanocrystals for Drug Release Applications
Adsorption of Methyl Orange from Aqueous Solution Using Polypyrrole/Andalusite Nanocomposite
Adsorption of Crystal Violet Dye from Aqueous Medium Using Alginate/Acrylamide/Graphene Oxide Composite Hydrogel
Optimization of the laminated composite beam with box section under pure shear load
Surface entrapment of hydroxyapatite on ۳D printed polylactic acid interference screws for biomedical application
Examining Internal Defects in ۳D FML Composites with Cork Core Using Active Thermography
Rheology and Viscoelastic Behavior of MWCNT-Reinforced EPDM/SBR Nanocomposites
Investigating joint failure mechanisms in continuous ultrasonic welding of GF/PA۶ thermoplastic composites
Investigation of the effect of using an energy director on the quality of static ultrasonic welding of CF/PA۶ thermoplastic composite
Tensile Properties of Vacuum Infusion and Hand Lay-Up Processed Glass Reinforced Composites
Design and stress analysis of the protective rod of a rail-car bogie bolster made of hybrid metal and carbon/epoxy composites under low-velocity impact
Numerical Strength Analysis of Fall Protection Loads on the ۲.۵ MW MAPNA Wind Turbine Nacelle Cover
Advanced plant-derived wound dressing with enhanced healing properties
Development of a honey-based bilayer wound dressing: a novel strategy for effective wound recovery
Novel Experimental Approach to Enhancing the Tensile Properties of GFRP Laminates through Steel Wire Reinforcement
Comparative Experimental Study of Open Hole GFRP and Aluminum Plates under Tensile Loading
Effect of carbon and boron addition on physical and mechanical properties of aluminum metal matrix composite, a simulation study
A novel Taguchi-based tabular neural network (TabNet) model for elastic anisotropic short fiber reinforced composites
Addition of Graphene Content on Silicone-Epoxy Nanocomposite: Hydrophobicity, Adhesion, and Hardness
Experimental Study on Foam Density Influence in ۳D-Printed Foam-Filled Sandwich Beams Under Flexural Loading
Study on The Prevention of Laminated UPVC Profiles from Deformation by Simultaneous Decrease in Heat Buildup (HBU) and Enhancement of Their Heat Deflection Temperature (HDT)
A novel polymeric nanocomposite based on MXene toward EMI shielding material: a Review paper
An Ablative EPDM based nanocomposites : A Review Paper
MXene based polymeric nanocomposites as Promising Dielectriec material: A Review Paper
Investigating the impact of different boundary conditions on the dynamic behavior of a composite panel
A case study for mechanical behavior of lattice reinforced cementitious composites under uniaxial compression
Numerical Simulation of Cone-Jet Formation for processing pol-ymeric particles using Electrohydrodynamic Atomization tech-nique
Fabrication of Nanocomposites Based on PANI and P۳HT by Crystallization
Application of Carbon-based Nanocomposites for Stability Enhancement of Polymer Solar Cells
Investigation of the effect of shape memory alloys on Pressure capacity of polymer composite Pipes
Experimental Comparison of Damage in Fiber-Metal Laminates with Different Layer Arrangements Subject to Static Loading
A numerical investigation of Newtonian and non-Newtonian fluid-filled nested hyperelastic structures under low-velocity impact loading
Design and fabrication of a flexible battery fatigue tester to investigate the effect of geometrical parameters on electrochemical performance
An analytical investigation on lithium-ion battery electrode electrical conductivity using micromechanics
Comparative analysis of re-entrant honeycomb and star-shaped auxetic meta-structures: energy absorption and Poisson's ratio performance
Stress Analysis of Coated Thin Foils in Flexible Batteries under Static Bending Load: A Finite Element Approach
Influence of Printing Parameters on ۴D-Printed Samples
Improving lightning strike protection by through-thickness direction fibers in ۳D CFRP composites using woven carbon fibers and nanoparticles
Detection of Transverse Cracking Damage in GFRP by Acoustic Emission and Digital Image Correlation Techniques
Anisotropy of thin metal foils used in flexible electronics
Strain-based failure criteria utilizing the modified maximum strain
Effect of fabrication method on electromagnetic properties of nanocomposites based on MWCNTs for RCS reduction
Numerical study of low-velocity impact on GLARE laminates based on elasticity concepts
Evaluating Shape Memory Properties of Recycled PET and HDPE vs PET with Carbon Fibers
Statistical analysis of fatigue life of laminated composites using artificial intelligence
The effect of grid-box material on energy absorption of shear thickening fluid-filled hyperelastic structure: A numerical study
Mechanical characterization of thin-walled Al-honeycomb core sandwich structures reinforced thin-ply carbon-glass fiber facings
Quasi static indentation of fully polypropylene sandwich panel
The Impact of Projectile Velocity on the Ballistic Performance of Layered Composites Consisting of Aluminum, Glass Epoxy Composite, and Alumina-Reinforced Elastomer
Localized Impulsive Response of Aluminum Three-Layered Sandwich Cylinders with Auxetic Core
Parametric Stability of Fiber Metal Laminate Cylindrical Shells Under Harmonic Axial Loads
On the comparison between Selenium penetrating glue and composite patch for enhancing fracture resistance of aluminum alloy
Comparison of Different Fiber Distribution Models in Vibration of Functionally Graded Nanocomposite Cylindrical Shells
Vibration Analysis of Nanocomposite Cylindrical Shells Reinforced with Randomly Distributed Wavy Carbon Nanotubes
In-situ growth of binder-free copper-zinc oxide Nanocomposite to enhance supercapacitor electrode performance
A nature-inspired pattern for improvement in-plane compression of honeycomb structures
A chiral-based topology for improvement the mechanical properties of auxetic structures
Application of biodegradable polymeric composites in cartilage tissue regeneration using the electrospinning approach
Development of metal-based composites with anti-inflammatory properties for joint regeneration
Creep behavior of KER ۸۲۸ epoxy resin reinforced by MWCNT: experimental approach
Experimental Investigation of the Effect of Adding MWCNT on Crack Growth in Mode III Fracture of Adhesive Joints
Investigating the Fe-Cu-Ni composite formation using elemental powders
Thermodynamic Investigation of Possible Composite Compound formation from SiO۲-Al۲O۳ Reaction
Investigation of TiO۲-Al۲O۳ Composite, Applications, Thermodynamics, and Producible Compounds
An Experimental Investigation of the Creep Behavior of Single-Lap Adhesive Joints with PMMA Sheets
Numerical Investigation of Tensile Properties of GFRP Composites Reinforced with Stainless Steel Wires
Predicting Fatigue Behavior of Glass-Epoxy Composites with Initial Damage
Degradation and Biocorrosion of Composite Materials inBiomedical Implants: A Comprehensive Review of Mechanisms and Applications
Optimization and Simulation of Energy Absorption in Composite Propeller Under High Speed Impact
Analysis of Energy Absorption in Composite Sandwich Panels with Different Core Structures Under Impact Loading