پنجمین کنفرانس بین المللی کامپوزیت، آذر ماه ۱۳۹۵

مقالات پذیرش شده در پنجمین کنفرانس بین المللی کامپوزیت

• Development of 3D Knitted Preform for Creating a Tjointmonolithic composite

• High-Velocity Impact Response of Isogrid Stiffened Composite Panels

• Evaluating the effect of multi-walled carbon nanotubes on the mechanical performance of anisogrid composite panels under transverse loading

• Effects of functionalized graphene nanoplatelets on the flexural properties of basalt fiber/epoxy nanocomposite system

• Microvascular-based self-healing E-glass fiber/epoxy composites under tensile testing condition

• On the flexural strength of self-healing E-glass/epoxy composites containing micro-vascular channels

• Flexural properties of basalt fiber/epoxy composites with nano-ZrO2 enhanced matrix

• Special Apparatus for Simulation of Pre-stress on Filament Wound Composite Cylinders under Ballistic Impact Loading

• Utilization of Agro-Waste Fibers in Plastic Composites; A Comparative Study

• Dynamic mechanical thermal analysis of cured epoxy resin by capsulated 1-methylimidazole curing agent for making advanced composites

• Magnetic TiO2/MWCNTs Nanocomposite: Synthesis, Characterization and Photocatalytic Degradation of Methyl Orange

• Structural Characterization of MWCNTs/Co-TiO2Nanocomposite and Degradation of 2,4-Dichlorophenol

• The Influence of Vacancy Defects on The Young’s Modulus of Graphene Sheets

• Thermal buckling of FGM plates based on two variable refined plate theory using bubble finite strip method

• Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method

• Effect of Mixing Condition on Mechanical Properties of Compatibilized Polyamide 12/Nanoclay/Thermoplastic Elastomer Nanocomposites

• A Study on Barrier Properties of Compatibilized Polyamide 12/Nanoclay/ Thermoplastic Elastomer Nanocomposites: A New Nanocomposite for Gas Tanks of Automobiles

• Influence of Interface Fiber Orientation on Delamination Initiation and Growth of Laminated Composites under Mode II Loading

• A Novel Analytical Model to Estimate Mode I Strain Energy Release Rate of an Adhesive-Interlayered DCB Specimen

• Elastic Behavior of Self-Healing Composites using a Micromechanical Model

• The Effect of Nano Modified Sizing Material on the Flexural Properties of Glass/Epoxy Laminated Composites

• A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II loading

• Creep and Recovery Behaviors of Hybrid Graphene/CNT/Epoxy Nanocomposites

• Prediction of long term durability of polymeric composite materials exposed to the acid and high temperature environmental conditions

• Prediction of Mechanical Properties of Highly Filled Polyurethane Composites by Quadratic Statistic Modeling

• Optimization of the binder s network of a highly filled polyurethanebased composite using Taguchi experimental design

• Metallic short fiber-reinforced adhesively bonded joints

• The role of interface fiber orientation on the delamination growth of ADCB E-glass/epoxy laminated composite specimens

• Experimental study on flexural and shear behavior of steel beams using carbon laminate

• Role of reinforcement content on the fracture behavior of DRA under dynamic loading

• Strengthening of RC Arch elements Using Fiber reinforced polymer (FRP) Composites

• Preparation and characterization of amine/PMMA microcapsules for self-healing epoxy-based composites

• Stiffness prediction of polymer concrete using micromechanical approach

• Progressive damage analysis of composite cruciform specimen under biaxial loading

• Burst modeling of type IV high pressure storage vessel

• Enhancement of adhesive joint strength via metallic bars embedded in the adhesive fillet

• The Toughened Nanocomposite Epoxy Adhesive

• Morphological study of Magnetic Fibrous PLGA Biocomposites Produced by Electrospinning

• Studying the Effects of Degassing Treatment and Adding Coupling Agent on Flexural Properties of Milled Fiber/Epoxy Composites

• Wear Mechanisms of Milled Fiber Reinforced Epoxy Composites

• Reinforcement of welded metal tubes joints using polymeric laminated composites

• Experimental study on compressive strength of resin-epoxy composite reinforced with shape memory alloy fiber under static load and assessment of some effective parameters

• Fabrication, Characterization and Photocatalytic application of sol-gel derived MWCNT-ZnO hybrid nanomaterial

• Failure load prediction of steel-CFRP double strap joints under quasi-static tensile loading

• Crashworthiness of composite and aluminum thin-walled boxes-A numerical study

• TiO2/NiFe2O4/Graphene Nanocomposite and Photocatalytic Degradation of Basic Blue 9

• TiO2/Fe3O4/Graphene Nanocomposite: Synthesis, Characterization and Photodegradation of Methylene Blue

• Optimized manhole made of composite SMC using Taguchi method

• Hyper-elastic and cyclic response of composite samples of NR/SBR reinforced by nylon short fibers

• Experimental study on tensile, compressive and flexural properties of epoxy nanocomposite at low graphene contents

• Tensile and hardness properties of commercially pure titanium processed by surface mechanical attrition treatment (SMAT)

• Preparation of elastomeric foam having high cell pressure and foaming agent content-independent foam density

• Optimization of Fiber-Reinforced Plastic (FRP) /Metal Joints using the Complex Method

• Finite Element Analysis of Piping Composite Joints under Bending Load

• Evaluating microstructural characteristics and mechanical properties of AA 5083/SiCnp nanocomposite material

• Theoretical Framework for Evaluating the Mechanical Properties of Composite Bone Scaffolds

• Finite Element Analysis of Pipe Rehabilitation with Polymeric Composites

• Finite Element Modeling of Buried FRP Pipe Under Traffic Loads and Internal Pressure

• Finite Element Modeling of the Free Vibration Behavior of Reinforced Polymers with Carbon Nanotubes

• Micro-Hardness and Microstructure of Mg/SiC Metal Matrix nano-Composites

• Fabrication of Aluminum Based Surface Composites using Hot Rolling Method

• Fabrication of Magnesium/Hydroxyapatite Bio-composite Using Stir Casting Method

• Effect of Rolling Temperature on Mechanical Properties of Aluminum/SiC Metal Matrix Composite

• Experimental investigation of the influence of adding nanotubes on tensile mechanical properties of laminated composites

• Experimental investigation of the influence of adding nanotubes on Mode I interlaminar fracture toughness of laminated composites

• The mechanical properties of an asymmetric geometric structure for use in morphing wings

• Numerical and analytical study on low velocity impact response of functionally graded carbon nanotube reinforced composite beams

• A new damage model to predict orthotropic nonlinear behavior of woven glass-epoxy composite by experiment and iterative simulation

• Experimental investigation on effects of addition of carbon nanotubes on QS-PS penetration in the glass/epoxy composite laminates

• Experimental investigation on effects of the addition of carbon nanotubes on the mechanical properties of glass/epoxy composite laminates

• Experimental investigation on effects of span ratios on QS-PST in glass/epoxy composite laminates

• Comparing Mechanical Properties of Polymer Based Graded and non-Graded Materials Reinforced with Carbon Nano tubes

• Novel Composites Using 3D Fabric by Vacuum Infusion Method

• Comparison between the tensile strength and micro hardness of Nano adhesives

• Strain rate effect on the bending properties of latania fiber-reinforced PP/EPDM composites

• Buckling Behaviors of Variable Stiffness Composite Cylindrical Shell with Elliptical and Circular Cross Sections under External Hydrostatic Pressure

• Multiple impact analysis of GLAss REinforced aluminum laminates (GLARE)

• Finite element simulation of projectile nose effect on impact response of GLARE using LS-DYNA

• Experimental investigation of nanofiber interleaving effect on impact response of GLARE

• Analytical modeling for free vibration of functionally graded piezoelectric energy harvester with geometric nonlinearities

• Supersonic Flutter Analysis of Curvilinear Fiber Variable Stiffness Composite Laminated Plates

• The investigation of mechanical properties of TiB2 particles reinforced AZ80 composites fabricated by dynamic compaction

• A Model to Assess Progressive Fatigue Damage in GFRP Composites with layup systems of [0/±45], [90/±45], and [0/±45/0] over StressCycles

• Investigating the Effect of Moisture Diffusion on Composite Beam under Impact

• Investigating the Response of Polymer based Composites to Unidirectional Tension using Thermal-moisture Analogy

• Facile synthesis of Graphene Oxide-Fe3O4 Nanoparticle Composites

• Free vibration analysis of composite beam with different boundary condition and considering the effect of Poisson s ratio

• Interface element including the combination of damage and friction

• Polypyrrole/Graphene oxide/Polymethyl methacrylate Composite as Sensor for Acetone Vapor Detection

• Functionalization of linseed oil-filled microcapsules with PMMA shell by using HMDA for self healing application

• Experimental investigation on the energy absorption of self-healing composites subjected to impact loading

• Investigation of the Mechanical Properties of the Cylindrical Composite Shells in Experiment

• Experimental study of the single strap hybrid joint under static load

• Tensile properties of self-healing metal matrix composites reinforced with superelastic NiTi wires

• Experimental study on the effect of stacking sequence of layers in the fiber metal laminates subjected to static and dynamic tests

• Effect of thermal cycles on repairing the edge-cracked aluminum plates by using carbon/epoxy composite patches under tensile load

• Development of a durable superhydrophobic PVDF nanocomposite coating

• Experimental and Numerical Analysis of Sandwich Composite Beam under Flexural Bending

• Shape recovery capability of the shape memory alloy wires embedded in the carbon/epoxy composite laminates

• Interface effects on the load distribution in the hybrid SMAcarbon/ epoxy composites

• Investigating of Effect of Chemical Surface Modification of SiC Particles on Mechanical and Tribological Properties of SiC-Epoxy Composite

• Surface Characteristics and Thermodynamic Adsorption in Nanocellulose Reinforced Bagasse Fiber-Cement Composites

• COMPARISON THE BEHAVIOR OF CONCRETE SLABS REINFORCED WITH FRP BARS AND CONCRETE SLABS REINFORCED WITH STEEL BARS UNDER CYCLIC LOADING

• Synthesis and reduction of graphene oxide and studying the impact of synthesis method and reduction on graphene/P3HT nanocomposite properties

• Interfacial Toughening of Glass Fiber-Epoxy Composites using Electrospun Nanofibers

• Effect of Unsaturated Carboxylate and Nanoclay on Rheological and Morphological Properties of Composites Based on SBR

• The Overview of the Development of Chinese Aramid Honeycomb and Applications

• Natural Frequency Determination of Functionally Graded Thick Hollow Cylinders Using Galerkin Method

• Using Lamb waves for health monitoring of composite plate-like structures based on wavelet transform

• Hot Compression Behavior of Severe Plastic Deformed AA6061-SiC Nanostructured Composites

• Free Vibration Behavior of Grid Stiffened Composite Plates with Various Boundary Conditions

• Numerical and experimental static bending analysis of composite sandwich panels with grid stiffened core before and after transverse impact loading

• Optimization of Lattice Composite Plates Under Uniformly Distributed Pressure Load Using GeneticAlgorithms

• Thermal induced free vibration analysis of lattice FGM plates

• Thermal buckling of lattice composite plates

• Dynamic response of multilayered composite conical shells subjected to lateral impulsive pressure loads

• Dynamic stability of grid stiffened composite cylindrical shells under harmonic exciting axial force

• On the stability of water repellent nanocomposite coatings

• Cohesive Zone Modeling of Delamination in Multilayer Composite Circuit Boards

• Study of fiber surface treatment on mechanical properties of epoxy composites fabricated

• Computational Fluids Dynamics Simulation to Predict Vacuum Infusion Process

• Interfacial Properties between Carbon Nanomaterials and Polymer Matrices

• Design of Particulate Materials and Engineering Application

• Challenges and approaches towards specifying nanomaterials