چهارمین کنفرانس بین المللی آلومینیوم ایران IIAC۲۰۱۶، اردیبهشت ماه ۱۳۹۵

مقالات پذیرش شده در چهارمین کنفرانس بین المللی آلومینیوم ایران IIAC۲۰۱۶

• An investigation of using sodium nitrate as a foaming agent of production closecell aluminum foam via Powder-Compact Foaming Technique

• Passive behavior of AA6061 aluminum alloy in borate buffer solutions

• Effect of chloride ions concentration on the passive behavior of AA6061 aluminum alloy

• Factors Effect on Aluminum Extrusion Streaking Defect

• The Roll of Bauxite and Alumina in Iran’s Primary Aluminium Business

• Fives, a global technology provider in the carbon sector

• Fives sustainable solutions to reduce emissions in the reduction sector

• Modeling of non-Equilibrium Solidification of Aluminium-Copper Alloys

• Daynamic nature of diffuson during solidification

• Mechanism Study and Parameter Optimization of A356 Aluminum AlloyElectrochemical Polishing

• An investigation on the Mechanical properties of Al-Mg2si-siC hybrid Composites

• The Properzi Technology for the Production ofAluminium Rod and Aluminium Ingots

• THE PROCESSING OF ALUMINO SILICATES FOR THE PURPOSE OF PRODUCINGALUMINA

• The effect of inferior and superior aluminum infdustries on the economy of iran (case stude: kaveh khuzestan alminum)

• Assessment of optimal conditions in centrifugally cast of Aluminum-Brassbimetal composite

• The effects of friction confficient and strain rae on the AI5052 sheets fabricated by CGP process

• Open-cell Aluminium Foams Reinforced by Alumina Nanoparticles

• Thermo-Mechanical Analysis of Tool used in FSW Process of Al 1100 Alloy

• Influence of aging treatment on mechanical properties and microstructure of Al6061-nano Al2O3 Composites

• Investigation of gallium extraction from Bayer solution using Strongly Basic Anionic Exchange Resins

• The Effect of Repetitive Corrugation and Straightening by Rolling (RCSR)Process on the Semi-solid Microstructure of A356 Aluminum Alloy

• Preparation and characterization of Al- 4.5 Mg alloy by mechanical alloying

• Investigation of Using Filler Metal in Friction Stir Welding of Aluminum foam Sandwich Panels

• The Cost-Benefit Analysis of AlPSim and two other project for Optimization Consumption energy(Almahdi Hormozal Aluiminium smelter Case Study)

• The Cost-Benefit Analysis of Implementing Level3 Automation and two other project for Optimization Consumption energy(Almahdi Hormozal Aluiminium smelter Case Study)

• Production of alumimum requires high energy consumption using high quality row material could reduce energy consumption

• Measuring the effectiveness of circuit grinding coke of Anode plant at Almahdi-hormozal Aluminium complex

• Improve the performance of bag filter on preheating and calculate the amount of Fine and heat transferred(case study: almahdi-hormozal alminium smelter)

• Effect of tool rotational speed on the microstructure and mechanical properties of projection friction stir spot welding of 2024 aluminum alloy

• Effect of temperature and Al-5Ti-1B grain refiner on the tensile properties of commercially pure Aluminium

• Investigation of the optimum ratio of raw material stoichiometry to produce fe -TiC/AI2O3 Composite

• Effect of tool dwell time on the microstructure and mechanical properties ofprojection friction stir spot welded 2024 aluminum alloy

• A Johnson–Cook model for deformation behavior of 2030 aluminum alloy under elevated temperature

• Closed-cell aluminum foam manufactured by accumulativeroll-bonding and friction stir processing

• Effect of voltaren drug and voltaren expired drug as a corrosion inhibitor for aluminium in acid solutions

• Application of annealing and accumulative roll-bonding processes forenhanced mechanical properties of Al 1050

• Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition

• Simulation of Aluminium Ingot Pot by Neural Network for Temperature Control

• Study the Effect of Strontium Addition on Microstructure, Impact Toughnessand Corrosion Behaviour of Al-Mg2Si In-situ Composite

• The effect of aluminum on the structure and electrochemical performance ofLi Ni0.5Mn0.3Co0.2 O2 positive electrode materials for Li-ion batteries

• Al- CNTs Nano-composite Produced via Double-pressing Double-sintering Method

• Influence of Temperature and Pressure on Mechanical Properties of CNTs-Reinforced Aluminum Nano-composites Fabricated by Double-Pressing Double-Sintering Method

• Investigation of friction stir welded jonts of 1050 aluminum alloy by inserting Cu foils

• Influence of Mg Addition on Microstructural Characteristics and Fracture Toughness of A356/SiCp Composite Castings

• Experimental filling friction friction stir welding of exit hole and numerical simulation-A Modified technique to apply practically for pipe AA5456

• Fabrication and characterization of Al-matrix composites reinforced whit carbon nanotube

• Investigation of microstructure of A319-matrix in-situ casting composite reinforced with iron based intermetallic produced by stir casting process

• study on the kinetics of the growth of intermetallic layer on the surface of CK45 steel during hot dipping process in molten alumimium

• Optimization of the heat treatment of rheocast alloyA356- T6

• The Effects of Quenching Media and Aging on Residual Stress and MechanicalProperties of 2024 Aluminum Alloy

• Investigation properties Aluminum coated by active screen plasma nitriding

• Green Aluminium Extrusions - Breakthrough Development in Sustainability from UAE to the World

• Innovative Product Design - Twisted Aluminium Profile at KAIA Airport Saudi Arabia

• Breakthrough Sustainable Innovation: The Journey behind the Development of 90 Minute Fire Rated Door

• The impact coke granulation on pitch onsumption on carbon anode

• The impact of butts on density of green anode and pitch consumption rate

• Increasing Aluminum production purity in reduction cells

• Effect of Thermo-Mechanical Age Hardening on Strength, Hardness and Elongation in an Al-Cu-Mg Alloy

• The effects of rotational speed on the microstructure of FGM hypereutectic Al-17wt%Si cast via centrifugal

• Heat Treatment and Evaluating the Mechanical Properties of Silicon Carbide-Aluminum Alloy Composite

• The effects of Process Parameters on Synthesis of Aluminum Nanoparticles Produced by Electromagnetic Levitational Melting Gas Condensation Method under Helium atmosphere

• Recycling of aluminium alloy ADC12 tunring chips via mechanical stirrer

• Effects of Zr element and Solidification Parameters on the microstructure and tensile properties of Al-7%Si-0.5%Mg Alloy

• The effect of infrared rapid heating on microstructure and mechanical properties of Al alloy 319

• Evaluation AluminumAlloy1050 a Corrosion in a simulated environmentHeller tower by polarization method and determine the optimum conditionsfor maintenance

• Synthesis and sturctural characterization of nanocrystalline al-10at.%Li powder prepared by mechanical alloying

• The effect of B elements and cooling rate on the microstructure and tensile properties of Al-7%Si-0.5% Mg alloy

• Evaluation of Ti addition and cooling rate effects on the microstructure and tensile properties of A1-4%Cu-3%Si alloy

• Micostructural evolution of Al-15(wt.%)Mg with Al-8B grain refiner and cooling rate

• Effect of FSSW parameters on grain size and hardness of 6061-T6 Al indissimilar joining to DP590 dual phase steel

• Improvements to the sintering behavior of yttria-stabilized zirconia coating by addition of Aluminum

• Effect of Grain size and oxidation on the contact angle of water with pure aluminum

• Investigation on the productiion of an Al matrix composite reinforced with metallic glass particles using equal channel angular pressing ECAP

• Experimental study and characterization of activated alumina adsorbent

• In situ synthesis of aluminium matrix surface composites by friction stirprocessing

• Electrochemical Corrosion Behavior of Friction Stir Welded AA6061 in NaClSolution

• Mechanical Properties of AA2024 In the Presence of Al-Cu IntermetallicSurface Layer

• A review on recent advances on aluminium for automotive applications focusingon passenger cars

• Microstructural evolution of Al-4(wt.%)Mg with Al-8B grain refiner and cooling rate

• Experimental investigation of Microstructure and Mechanical properties on Twist exusion forming process of AA6063 aluminmium Alloy

• Identify the challenges of risk of investing in the aluminum industry s supply chain performance after the end of international sanctions

• Effect of graphene on the mechanical properties of Al7075 - graphene nanocomposite produced by accumulative roll bonding

• Preheating anodes without consumption energy in aluminum reduction cell

• Study of Tribological Properties of Microwave-Sintered CuNi-Al2O3 Nanocomposites

• Analytical and numerical modeling of air V-bending for AL3105 sheets

• Analysis of stiffness and dent resistance in aluminum sheets

• Corrosion resistance of 6063 aluminum alloy by anodizing treatment in a phosphoric acid, boric acid and oxalic acid baths with SEM and TAFEL study

• Effect of Twin-Roll Casting Parameters on Mechanical and MicrostructuralProperties of AA5083-H321 Sheet

• An investigation on the effect of crystal orientation on corrosion behaviour of ECAP processed Aluminium 7075 alloy

• Metallurgical and structural characterization of novel Al/ β-Al3Mg2nanocomposite synthesized via powder metallurgy

• Studying enhancement of Buckling of composite 2D-FG Cylindrical Shellsproduced by Alumina and Aluminum elements

• Eight Continuous Annealing and Pre-Treatment lines in operation

• Influences of tool pin profile on microstructure , mechanical and defects of Friction stir welded 7075 aluminum alloy

• Improvement of 6061 aluminum alloys wear resistance by electrodpositednickel coating

• Evaluation of Mechanical Properties of High Strength 7075 & 7050 AluminumAlloys after Single and Multi-Stage Precipitation Hardening Heat Treatments

• The effect of process parameters on the combustion synthesis of Ti- Al/TiC composite materials

• Glassy state formation in (Al90Ni8Zr2) 100-x Mmx melt spun ribbons

• Effect of Graphite Content on Characteristics Al/40SiC/Gr Hybrid Composites Processed by In situ Powder Metallurgy (IPM) Method

• A Study of Plastic Deformation Behavior of AA1050 Aluminum Alloy duringPure Shear Extrusion with Back Pressure

• Analyses increase thickness Aluminum profiles dies or die wear in the direct extrusion(Die life)

• Recovery of high pure alumina from aluminum hazardous waste using facileand inexpensive method

• Numerical Modeling of Macrosegregation in Direct-Chill Casting of Al-Cu Billets

• The State-of-the-Art and Development of Sidewall Materials for Al Reduction Cells in China

• The influence of Nd: YAG laser welding parameters and surface modification on hot cracking behavior of 5456 Alalloy

• Influence of pulsed Nd: YAG welding parameter on hot crack in aluminum alloy 5083

• Cuber Trevisan: the smart , efficient coating solution

• Historical review of Aluminium degassing and future developments

• Sustainable chemistry for sustainable industry

• Numerical and experimental study of bursting prediction in tube hydroforming of Al 7020-T6

• How to obtain high performance in anodizing with low operational costs, sludge reduction and zero liquid discharge

• Base metal Microstructural considerations for anodizing alumium

• The Continuous Development of SAMI’s Alumina Technology and Equipment

• Development and Application of SY Pot Technology in the Last 30 Years

• The Research and Application of Calcination Technology for theVertical Shaft Furnace

• Current Situation and Development Trend of China’s AluminumFabrication Industry

• China’s Technology and Equipment for Aluminum Plate/Strip/FoilProduction

• Strong winds of growth for the aluminium industry in India

• Application of new technologies in the drawing of aluminium wire

• Nanostructured AA6063 alloy using equal channel angular pressing

• The effect of hot extrusion conditions on nanostructure and corrosion properties of anodized AA6063 alloy

• Qualitative Investigation of Petroleum Coke Production Condition

• The effect of porosity and pore shape on the mechanical properties Of Nanoporous Aluminium Single Crystal, Using molecular dynamics simulations

• Current performance Achievements and future improvement orientation of 68 KA modernition project in arak aluminum smelter,iran

• Choice for Structure of Pre-baked Anode Assembly in 430 kA Aluminum Pot